国产精品igao视频网网址不卡日韩,亚洲综合在线电影,亚洲婷婷丁香,黄色在线网站噜噜噜

  纖維素納米晶（CNC）具有可再生、生物相容好、無毒、可生物降解、機械性能優異、比表面積大、水分散性好等特性，在石油開采、聚合物復合材料增強、水凝膠、氣凝膠、超級電容器、節能建筑、化妝品、造紙、涂料、液晶和廢水處理等領域顯示出廣闊的前景（圖1）。然而，CNC的親水表面限制了其進一步應用。對CNC表面進行聚合物接枝不僅可以改變其表面的親疏水性能，而且可以賦予CNC多種其它功能（電導率、pH 或溫度響應性、反應性等）。其中，通過表面引發的原子轉移自由基聚合（SI-ATRP）可以很好地控制CNC表面聚合物的接枝密度、接枝鏈長和末端接枝等，進一步拓展了纖維素納米晶的應用領域。

圖1. 納米纖維素的廣泛應用

  華南師范大學張振副研究員和周?chē)?guó)富教授、法國波爾多大學Gilles Sèbe教授以及西南大學黃進教授等人在Journal of Applied Polymer Science期刊發表了題為“Grafting polymers from cellulose nanocrystals via surface-initiated atom transfer radical polymerization”的綜述文章，系統地闡述了近年來通過SI-ATRP對CNC表面進行聚合物接枝的調控和機制，包括接枝密度、接枝鏈長及接枝區域的調控；并對其在納米復合材料用填料、刺激響應材料、載體劑和其它領域的應用進行了總結（圖2）。最后，針對目前通過SI-ATRP在CNC表面接枝聚合物存在的問題，該綜述進一步指出CNC表面接枝聚合物的面臨的發展機遇和挑戰。

圖2. 通過SI-ATRP對CNC表面調控及其性能和應用示意圖

  ATRP是一種活性聚合，可以通過調節單體和引發劑的比例以及單體轉化率，有效調節聚合物的分子量。SI-ATRP作為一種“grafting from”的接枝聚合物方法，和“grafting to”的聚合物接枝方法相比，具有空間位阻小、接枝密度高的優點。由于SI-ATRP這種可控的接枝鏈長和接枝密度，被廣泛用于各種基體或納米材料的表面高分子接枝改性。目前已經通過SI-ATRP在納米纖維素尤其是纖維素納米晶上接枝了各種不同結構的高分子（圖3），近年來在這一領域也發表了相關綜述性文章，然而關于SI-ATRP對CNC表面接枝聚合物的接枝密度、接枝聚合物鏈長和接枝區域的精準調控機制討論的綜述還很少，該綜述著重討論了通過SI-ATRP在CNC表面接枝高分子調控的機制及其對性能的影響和相關應用。

圖3.通過 SI-ATRP 在納米纖維素表面上接枝的各種聚合物

  接枝聚合物的密度：通過SI-ATRP在CNC表面接枝聚合物首先需要在CNC表面引入SI-ATRP的引發位點Br，目前一般采用BIBB的酰溴和CNC表面的羥基的酯化反應，CNC表面Br的含量很大程度上決定了接枝密度。然而這一過程仍然面臨著B(niǎo)IBB利用率低、Br含量相對較低、有機溶劑用量多、CNC的內部結構容易遭到破壞等缺點。在SI-ATRP的過程中，引發效率也會影響接枝密度；由于SI-ATRP過程中空間位阻較小，一般CNC-Br的引發效率比較高。

圖4. 通過SI-ATRP在CNC表面接枝聚合物的示意圖

  ATRP過程中需要無氧操作，而且需要大量的CuBr作為催化劑。ARGET ATRP是指在ATRP過程中加入過量的還原劑，和ATRP相比具有反應條件溫和、不需要嚴格除氧和催化劑用量少等優點。通過對比SI-ATRP和SI-ARGET ATRP發現，在常規的SI-ATRP中，聚合過程中鏈增長速率相對較慢，CNC-Br上的Br引發位點幾乎都能引發SI-ATRP，因此接枝密度相對較高（圖5）。而在SI-ARGET ATRP中， CNC-Br上只有少部分Br被引發，聚合過程中鏈增長速率相對較快，較長的聚合物鏈屏蔽了周?chē)鶥r的引發，因此CNC-Br的引發效率較低，接枝密度相對較低。

圖5. Br-CNC的SI-ATRP和SI-ARGET ATRP接枝機理示意圖

  接枝聚合物的鏈長：SI-ATRP 最重要的優勢之一是對接枝聚合物鏈長的準確控制，由于均相和非均相體系中的聚合機理可能不同，人們已經做了許多努力來證明SI-ATRP的反應活性。表征接枝聚合物的直接方法是通過 GPC 測量裂解的接枝聚合物的分子量和分散性。接枝聚合物通常需要在高溫下用強酸或強堿進行裂解，為了克服這個問題，學者們通常會在體系中引入犧牲引發劑。如通過采用紫外光可裂解聚合物進行 SI-ATRP 接枝，證實了接枝聚合物和游離聚合物之間的等效性。紫外光可裂解帶有 Br 引發位點的光連接劑，在犧牲引發劑的存在下進一步通過SI-ATRP接枝聚苯乙烯。結果發現接枝聚苯乙烯的分子量與游離 PS 的分子量非常吻合。由此說明，聚合物-g-CNC 中接枝聚合物的鏈長可以通過單體與犧牲引發劑的摩爾比或單體轉化率進行調節。

  CNC的末端聚合物接枝改性：通過控制聚合物在納米粒子表面接枝的區域可以實現CNC表面的不對稱接枝。例如通過硫酸水解等方法可獲得兩端帶有不同的官能團的CNC，即非還原端帶有羥基側基，還原端帶有醛基。通過對CNC的還原端進行區域選擇性改性可實現CNC表面的不對稱接枝。如圖6所示，首先采用亞次氯酸鈉（NaClO₂）將CNC表面的醛基氧化為羧基，然后分別與乙二胺和2-溴異丁酸N-羥基琥珀酰亞胺酯反應，進而通過SI-ATRP，可以在CNC的還原端接枝不同的聚合物單體，使CNC的一端接枝上斑片狀或多毛聚合物。通過TEM照片，可以觀察到金納米顆粒標記的斑塊狀的CNC，表明其表面聚合物的成功接枝。

圖6.（a）通過SI-ATRP對CNC的還原端改性；（b）通過SI-ATRP對CNC進行表面均勻改性；（c）一端接枝聚合物并用金納米粒子標記的斑片狀CNC的TEM圖像

  性能與應用：該綜述還進一步探索了利用SI-ATRP制備的聚合物接枝纖維素納米晶Polymer-g-CNC的性能以及在納米復合材料增強劑、刺激響應性復合材料等方面的應用。

  總結與展望：由于CNC優異的性能，開發低成本、高性能的纖維素基可生物降解材料是替代化石基塑料的有前途的替代品。近年來，CNC生產已朝商業化方向發展。然而，CNC 的親水表面和表面官能團缺乏（除了羥基）阻礙了它們更廣泛的應用和商業化。在此背景下，通過聚合物接枝對 CNC 進行表面改性可用于調節其表面性質，并賦予 CNC 多種功能，可以進一步促進其在許多未開發領域的應用。總之，通過 SI-ATRP 從 CNC 接枝聚合物是一種非常有前途的調整納米纖維素表面性質的方法。

  論文下載鏈接：http://doi.org/10.1002/app.51458

作者信息：

Dr. Zhen Zhang is an Associated Researcher at South China Normal University (Guangzhou, China) since 2019. He received his Bachelor of Engineer degree in Polymers from East China University of Science and Technology (Shanghai, China) in 2009, Master of Science degrees in Materials from ECUST and Chemical Engineering from Chalmers University of Technology (Goteborg, Sweden) in 2012, and PhD degrees in Polymers from Bordeaux University (Bordeaux, France) and in Chemistry from University of Waterloo (Waterloo, Canada) in 2017, respectively. His research interests mainly focus on the preparation, surface modification and applications of nanocellulose.

張振副研究員，本科畢業于華東理工大學，碩士畢業于華東理工和瑞典查爾姆斯理工大學，博士畢業于加拿大滑鐵盧大學和法國波爾多大學，2019年加入華南師范大學華南先進光電子研究院周?chē)?guó)富教授團隊，主要研究方向?yàn)榧{米纖維素（纖維素納米晶）的制備、改性和應用，Pickering乳液，相變材料等，目前已經在Chemical Engineering Journal, ACS Sustainable Chemistry & Engineering, Carbohydrate Polymers, Cellulose, Journal of Colloid and Interface Science, Advanced Sustainable Systems, ACS Applied Nano Materials和《化學進展》等期刊發表一作或通訊作者論文20余篇。

Gilles Sèbe is an Associate Professor at the University of Bordeaux in France, within the Laboratoire de Chimie des Polymères Organiques (LCPO). After receiving his Ph.D. degree in wood chemistry in 1996, he did a one-year post-doc at McMaster University in Hamilton (Canada), and then joined the BioComposites Center in Bangor (UK) for a two years period. In 2000, he was appointed at the University of Bordeaux, doing research and teaching on wood and biopolymers chemistry. His current research at the LCPO aims at developing novel nanocellulose-based functional materials, through the chemical tailoring of the nanocellulose surface. 

Yelin Hou (候曄琳) recieved her bachelor''s degree of Light Chemical Engineering from Shaanxi University of Science and Technology. She will receive her master''s degree of light industry technology and engineering from Shaanxi University of Science and Technology, and she is now a PhD candidate at the doctoral school of Chemical Sciences in the University of Bordeaux under the supervison of Dr Gilles Sèbe. Her research interests mainly focus on cellulose nanocrystals and organic-inorganic nanocomposites.

Juan Wang (王娟) received her Bachelor degree in Material Chemistry from Qiuzhen College of Huzhou Normal College in 2020 (which is renamed to Huzhou College in 2021). She is currently an engineer in ScienceK Ltd. ScienceK (閃思科技 www.sciencek.com) is one of the leading pioneers in the commercial production, functionalization, and application of nanocellulose (especially cellulose nanocrystals, CNC) in China. 閃思科技ScienceK是中國納米纖維素生產、改性和應用研發的先行者。

Prof. Jin Huang (黃進教授) obtained Ph.D degree in Wuhan University, and serves as the full-professor in Southwest University (China) and the director of “Chongqing Key Laboratory of Soft-Matter Material Chemistry and Function Manufacturing”. He carried out scientific research at Institute of Chemistry (Chinese Academy of Sciences), Wuhan University of Technology, Institut National Polytechnique de Grenoble, etc. His research focuses on "Polymer-Centered Soft-Matter Materials", "Sustainable Chemistry and Materials", "Flexible Materials and Devices", "Advanced Materials Manufacturing", etc.  The research on "cellulose nanocrystals-based materials" has achieved great progress. He has published over 200 peer-reviewed papers, and edited 3 monographs and wrote 8 book chapters.

Prof. Guofu Zhou (周?chē)?guó)富教授) received his Ph.D in Chongqing University, 1986. He served Philips Research Laboratories in the Netherlands as a senior scientist and principal scientist from 1995 to 2011. He is currently a Professor at South China Normal University (SCNU) in the field of micro/nano optoelectronic materials, devices and flat panel displays. He is also a Co-founder & Director of Electronic Paper Display Institute of SCNU, National Center for International Research on Green Optoelectronics and joint research labs of SCNU-TUE. He is leading several national research projects and Sino-Dutch joint projects.