J Membrane Sci, 2012, 397-399, 17-23:Modification of ceramic membranes for pore structure tailoring: The atomic layer deposition route
作者：Fengbin Li, Yang Yang, Yiqun Fan, Weihong Xing, Yong Wang*
關鍵字：membrane, atomic layer deposition
論文來源：期刊
發表時間：2012年
The technique of atomic layer deposition (ALD) is applied to the structural modification and pore tailoring of ceramic membranes. Ceramic microfiltration membranes with an average pore size of 50 nm are used as substrates, on which Al2O3 is deposited by ALD with the purpose to tailor their pore size. The thickness of the deposited Al2O3 layer increases with the number of ALD cycles, and it is confirmed by scanning electron microscopy that the pore size of the ceramic membrane decreases with increasing ALD cycles until the pores are completely sealed. It is found that an ultrathin selective layer with a gradient porous structure is formed, whose thickness can be tuned by varying the exposure time of percursors. With the increased ALD cycles, the Al2O3-deposited membranes have a decreasing water flux, and an increasing retention to bovine serum albumin. The membrane subjected to 600 ALD cycles has a reduced pure water flux from 1698 L (m2 h bar)−1 for an undeposited membrane to 118 L (m2 h bar)−1, while its BSA retention increases significantly from 2.9% to 97.1%.