Mechanical properties in glass fiber PVC-foam sandwich structures from different chopped fiber interfacial reinforcement through vacuum-assisted resin transfer molding (VARTM) processing
作者：Qihui Chen, Zhi Wang, Guizhe Zhao, et al
關鍵字：Sandwich structures, Chopped fiber, Fiber bridging, Wettability, Mechanical property
論文來源：期刊
具體來源：Composites Science and Technology
發表時間：2017年
Sandwich beams were prepared by vacuum-assisted resin transfer molding, containing a PVC foam core covered with two glass fiber/epoxy composite face sheets. Their mechanical properties were measured by impact test and three-point bending (3 PB) test. To improve the interfacial bonding between the PVC foam core and glass fiber face sheets as well as the mechanical properties of the sandwich structure, different chopped fibers (aramid fiber, carbon fiber and glass fiber) with the same lengths and densities were inserted at the face-core interface during fabrication. Compared with the beam without interfacial reinforcement, the bending strength and energy absorption were increased by up to 100% and close to 161% respectively under 3 PB condition, and the impact strength after interfacial reinforcement using chopped glass fiber was augmented by nearly 45%, surpassing those of other two kinds of chopped fibers. The interfacial distribution characteristics of different chopped fibers were tested using scanning electron microscopy. The toughening and strengthening mechanisms for mechanical properties were analyzed based on the interfacial crack-bridging and wettabilitybetween chopped fiber and resin.